Config:) Remote  Ethernetconfig  Option Card Addr - Comtech EF Data SLM-5650A Installation And Operation Manual

(CONFIG:) Remote  EthernetConfig  SNMP  Traps  Version
SNMP Trap Version: SNMPv1
Use the  arrow keys to select SNMPv1, SNMPv2, or SNMPv3. Press [ENT].
(CONFIG:) Remote  EthernetConfig  Option Card Addr
7.2.3.10.2
Option Card Addr: Gigabit Ethernet
Use this menu to edit the IP Address and subnet mask (range) for either optional interface. Use
the  arrow keys to select Gigabit Ethernet or Network Proc. Press [ENT].
When Network Proc is selected, the submenu also provides configuration options for this
optional module.
(CONFIG:) Remote EthernetConfig Option Card Addr Gigabit Ethernet
Option Card Ethernet IP Address/Range:
192.168.001.002/24
To edit the Gigabit Ethernet Interface Management IP Address and Range: Use the
arrow keys to select a digit, and then use the  arrow keys to change that digit. Press
[ENT].
(CONFIG:) Remote  EthernetConfig  Option Card Addr  Network Proc
NP Card:
BPM:Off
Use the  arrow keys to select AddrMode, Security, BPM, Traffic IP, or Mgmt IP .
Press [ENT].
Front Panel Operation
SNMPv3
The Trap Version selection is forced to SNMPv3 if you select SNMPv3 as
your SNMP Version.
Network Proc
AddrMode:Dual
Traffic IP
SNMPv2
(E)
(E)
(E)
Security: Low
Mgmt IP (E)
7–35
SLM-5650A Satellite Modem
Revision 10
MN-SLM-5650A