Lan Interface - Comtech EF Data SLM-5650A Installation And Operation Manual

E.7.5.4 LAN
Select Interface, Ethernet Ports, or ARP to continue.
E.7.5.4.1 LAN | Interface
Use this page to set LAN operating parameters, to view the MAC Address of the NP Interface, and
to set the IP Address and Mask of the NP Interface.

LAN Interface

MAC Address (read-only) – The MAC is set at the factory to a guaranteed unique address that
cannot be modified by the user.
IP Addressing Mode – Click for Single or Dual mode:
•
In Single mode, the Traffic IP Address is used as M&C as well as NextHop IP Address for
adjacent routers.
•
In Dual mode, the Management IP Address is used as M&C access to the NP Interface,
and Traffic IP Address is used as the NextHop IP Address for adjacent Routers.
Traffic IP Address – This is the IP Address of the NP Interface only. Once set to a valid value, it is
the address that should be used for M&C connectivity as well as the Next Hop Address when IP
Addressing Mode is set to Single.
Traffic Subnet Mask (1-30) – This is the Subnet Mask used in conjunction with the Traffic IP
Address to determine the subnet locally attached to by the LAN interfaces.
Appendix E
Figure E-21. LAN | Interface Page
E–39
SLM-5650A Satellite Modem
Revision 10
MN-SLM-5650A