Comtech EF Data SLM-5650A Installation And Operation Manual page 145

(Monitor:) Alarms  Unit
Unit ----------------
-------
Press [ENT] to access the available read-only SLM-5650A Unit Alarm screens. Use the
 arrow keys to navigate through the displayed character positions (Unit#1 through
#23). The status message to the right changes based on the current cursor position, as
follows:
Unit Alarm Position
Top row
Bottom row
The example that follows shows the appearance of the alarm status screen when you
select the Unit 1
Unit: +----------------
------
Front Panel Operation
Press <ENT> for
detailed status
Description
Unit #1 + 5.0 volt power supply is out of range.
Unit #2
+ 3.3 volt power supply is out of range.
Unit #3 + 2.5 volt power supply is out of range.
Unit #4 + 1.5 volt power supply is out of range.
Unit #5 + 12 volt power supply is out of range.
Unit #6
- 12 volt power supply is out of range.
Unit #7 + 18 volt power supply is out of range.
Unit #8
Cooling fan fault.
Unit #9 External reference activity status.
Unit #10
192 MHz clock Phase Lock Loop status.
Unit #11 10 MHz reference Phase Lock Loop status.
Unit #12
M&C FPGA configuration fault.
Unit #13 Modulator FPGA configuration fault.
Unit #14
Demodulator FPGA configuration fault.
Unit #15 Decoder FPGA configuration fault.
Unit #16
Transmit interface FPGA configuration fault.
Unit #17
Receive interface FPGA configuration fault.
Unit #18 FEC #1 FPGA configuration fault.
Unit #19
FEC #2 FPGA configuration fault.
Unit #20 Optional data interface card (module) FPGA configuration fault.
FPGA DCM Phase Lock Loop fault.
Unit #21 Network Processor mailbox communications error.
Unit #22
TRANSEC mailbox communications error.
Unit #23
st
character position:
7–39
+5.0V Power is
out of range.
SLM-5650A Satellite Modem
Revision 10
MN-SLM-5650A