7.2.3.3
(CONFIG:) Mode
Mode: Modem:TURBO
Interface:EIA-530
Use the arrow keys to select Modem Type, FreqBand, Interface, or (when applicable) the
Network Processor Working Mode. Press [ENT]. Use the arrow keys to scroll through the
available settings. Select your setting. Press [ENT] to finish.
Option
Modem:
FreqBand
Interface
Mode
The menu is fixed at N/A if the optional Network Processor is not present. Otherwise, select the Network
Processor Working Mode:
Front Panel Operation
FreqBand:L-Band
Mode:N/A
OM-73 – Select Linkabit OM-73 modem compatibility mode.
•
MIL-165A – Select functionality defined by MIL-STD-188-165A.
•
IESS-308 – Select functionality defined by IESS-308, the Intelsat Intermediate Data Rate
•
standard.
IESS-309 – Select functionality defined by IESS-309, the Intelsat Business Services standard.
•
IESS-310 – Select functionality defined by IESS-310, the Intelsat 8-PSK Intermediate Data Rate
•
standard.
TURBO – Select functionality defined by IESS-315 plus Comtech EF Data Turbo mode
•
interoperability.
16QAM – Select 16-QAM as a modulation type.
•
AUPC – Select Automatic Uplink Power Control.
•
RXBURST – Select when unit is a Vipersat STDMA Hub Modem with its Acquisition Mode set to
•
"Standard."
TXBURST – Select when unit is a Vipersat Remote Modem.
•
TURBO-FA – Select when unit is in Vipersat SCPC operation.
•
RXBRSTFA – Select when unit is a Vipersat STDMA Hub Modem with its Acquisition Mode set to
•
"Long".
LDPC – Select Low Density Parity Check and Spreading.
•
70/140 MHz (52-88 MHz, 104-176 MHz);
•
L-Band (950-2000 MHz).
•
EIA-530 – Base modem native interface
•
HSSI – Base modem native interface
•
Network Processor – Optional data interface
•
GigaBit Ethernet – Optional data interface
•
G.703 (BAL) – Optional data interface
•
G.703 (UNBAL) – Optional data interface
•
LVDS – Optional data interface.
•
RtrVSHub
•
RtrVSHEx
•
RtrVSRem
•
RtrVSREx
•
RtrMPHub
•
RtrMPRem
•
RtrPtoP
•
Bridge
•
(E)
Settings
7–23
SLM-5650A Satellite Modem
Revision 10
MN-SLM-5650A