Removing Nx Units - Omron Sysmac NX-PD1000 User Manual

4 Installation and Wiring
4-1-3

Removing NX Units

Precautions for Safe Use
Always turn OFF the Unit power supply and I/O power supply before you remove the NX Unit.
1
Use a flat-blade screwdriver to pull up the DIN Track mounting hook on the Unit to remove.
DIN track mounting hook
2
Put your fingers on the protrusions for removing multiple NX Units including the Unit to be
removed, then pull out straight forward to remove.
Precautions for Correct Use
• When removing an NX Unit, remove multiple Units together which include the one you want
to remove. If you attempt to remove only one Unit, it is stuck and hard to pull out.
• Do not unlock the DIN track mounting hooks on all of the NX Units at the same time. If you
unlock the DIN Track mounting hooks on all of the NX Units at the same time, all of the Units
may come off.
4 - 6
Flat-blade screwdriver
Protrusion for removing the Unit
Protrusion for removing the Unit
NX-series System Units User's Manual (W523)