Removing Nx Units - Omron sysmac NX Series User Manual

4 Installation and Wiring
Commercially Available Markers
Commercially available markers are made of plastic and can be printed on with a special printer.
To use commercially available markers, purchase the following products.
Product name
Markers
Special marker printer UM EN BLUEMARK X1
The markers made by OMRON cannot be printed on with commercially available special printers.
4-1-3

Removing NX Units

This section describes how to remove NX Units.
Precautions for Safe Use
Always turn OFF the Unit power supply and I/O power supply before you remove the NX Unit.
1
Use a flat-blade screwdriver or similar tool to pull up the DIN Track mounting hook on the NX
Unit to remove.
DIN Track mounting hook
2
Place your fingers on the protrusions on more than one NX Unit, including the NX Unit to re-
move, and pull the NX Units straight forward.
4-6
Model number
Manufactured by Phoenix Contact Manufactured by Weidmuller
UC1-TMF8
Flat-blade screwdriver
DEK 5/8
PrintJet PRO
NX-series System Units User's Manual (W523)