4 Installation and Wiring
4-1-2
Attaching Markers
Markers can be attached to the NX Units and terminal blocks on NX Units to identify them.
The plastic markers made by OMRON are installed for the factory setting. The ID information can be
written on them.
Commercially available markers can also be installed.
Replace the markers made by OMRON if you use commercially available markers now.
Markers
Installation Method
Insert the protrusions on the markers into the marker attachment locations on the NX Units and ter-
minal blocks on NX Units.
Marker
4 - 4
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Marker attachment location
Marker
<NX Unit>
Marker attachment location
<Terminal Block>
NX-series System Unit User's Manual (W523)