Replacing The Tray 1 Separation Roller Assy - Konica Minolta bizhub C353 Service Manual

Field Service Ver. 3.0 Jan. 2008
3.5.6

Replacing the tray 1 separation roller assy

A. Periodically replacing parts/cycle
• Tray 1 separation roller assy: Every 300,000 prints
B. Procedure
1. Slide out the tray 1.
2. Remove the manual bypass tray unit.
See P.103
3. Remove the tray 1 separation roller assy.
See the replacement procedures 1 to 6 in "Tray 1 feed roller/tray 1 pick-up roller."
See P.24
[1]
[2] [3]
[2]
[1]
6. To reinstall, reverse the order of removal.
[5]
[4] [1]
A02EF2C013DA
A02EF2C014DA
3. Periodical check
4. Remove two C-clips [1], the shaft [2],
spring [3], and guide [4].
Remove the separation roller fixing
plate assy [5].
5. Remove two C-clips [1], and remove
the tray 1 separation roller assy [2].
27