Maintenance Procedure Of The Paper Feed Section; Replacing The Feed Roller/Pick-Up Roller (Tray 1) - Konica Minolta BIZHUB 501 Service Manual

3. PERIODIC CHECK

3.11 Maintenance procedure of the paper feed section

3.11.1

Replacing the feed roller/pick-up roller (tray 1)

A. Periodically replaced parts/cycle
• Feed roller
• Pick-up roller
*1 501/421
*2 361
B. Procedure
[2]
[1]
[3]
46
: Every 750,000 prints (Actual replacement cycle: Every 300,000 prints) *1
: Every 675,000 prints (Actual replacement cycle: Every 300,000 prints) *2
: Every 750,000 prints (Actual replacement cycle: Every 300,000 prints) *1
: Every 675,000 prints (Actual replacement cycle: Every 300,000 prints) *2
[2]
50gaf2c108na
Field Service Ver.2.0 Mar. 2009
1.
Remove the front cover.
(See P.144)
2.
Remove the tray 1.
(See P.161)
3.
Remove the connector [1] and the 2 screws [2],
and then remove the paper feed unit /1 [3].