Default Settings - Fax/Scan - Default Scan/Fax Settings; Default Settings - Fax/Scan - Ip Relay Dest. Selection; Stamp; 2In1 - Konica Minolta bizhub C200 Operation Manual

9
9.2.5

Default Settings - Fax/Scan - Default Scan/Fax Settings

The default settings (settings selected when the machine is turned on or the [Reset] key is pressed) can be
specified.
- Current Setting: The settings specified before Utility mode was entered are set as the default settings.
- Factory Default: The settings return to the factory defaults.
Settings can be specified for the following parameters.
- Quality
- Resolution
- Color
- Density
- Background Adjustment
- File Type
- Zoom
- Sender
- TSI Selection
-

2in1

-

Rotation TX

- Quick Scan TX
-

Stamp

-

2-Sided TX

9.2.6

Default Settings - Fax/Scan - IP Relay Dest. Selection

When multiple IP relay stations are registered, the default IP relay station can be specified.
!
Detail
Register IP relay stations from the Network Setting screen of Administrator mode. For details, refer to
the User manual – Network Administrator.

Note

This parameter does not appear if the optional fax kit has not been installed.
9-8
User Settings / User Management / One-Touch/Box Reg.
bizhub C200