Setting The Operating Environment For This Machine; Configuring Default Settings For Normal Display And Enlarge Display Collectively; 14.10.2 Setting The Action For Switching The Display To Enlarge Display - Konica Minolta bizhub C754 User Manual
Hide thumbs
Also See for bizhub C754:
- User manual (427 pages) ,
- Quick start manual (130 pages) ,
- Shortcut manual (33 pages)
Table of Contents
Advertisement
14
14.10
Setting the operating environment for this machine
14.10.1 Configuring default settings for Normal Display and Enlarge Display collec-
tively
Select whether to arrange a single setting key for [Default Copy Settings] and [Default Enlarge Display Set-
tings], or [Default Scan/Fax Settings] and [Default Enlarge Display Settings].
If you wish to change the settings in Normal Display and Enlarge Display at the same time, select in the ad-
ministrator mode [System Settings] - [Reset Settings], and then set [Default Basic/Enlarge Display Common
Setting] to [Apply to all] (Default: [Do not Apply]).
14.10.2 Setting the action for switching the display to Enlarge Display
The default display mode of the Touch Panel can be set to Enlarge Display mode. You can also set the action
to be taken when the display mode is switched to Enlarge Display.
In the administrator mode, select [System Settings] - [Enlarge Display Settings], then configure the following
settings.
Settings
[Default Enlarge Display
Setting]
14-38
Setting the operating environment for this machine
Description
Select whether to use Enlarge Display mode as the initial display of the
Touch Panel.
[OFF] is specified by default.
14.10
bizhub C754/C654
Advertisement
Table of Contents
