Accessing the media server
To access the media server:
1. Click Start > Run to open the Run dialog box.
2. Type telnet 192.11.13.6 and press Enter to see if you get a login prompt. Repeat until
you get the login prompt.
3. Log in as craft or dadmin.
4. Log onto the Maintenance Web Interface. See
and return here.
Configuring both media servers using AIW
You need to configure both media servers and install the new license file and software updates
on each media server using the Avaya Installation Wizard (AIW). You can do it two ways:
Import the data from the filled-out Electronic Preinstallation Worksheet (EPW).
Type in the information manually using the filled-out EPW as a guide.
To access the Installation Wizard:
1. Activate the browser with the Home page.
2. Click Launch Avaya Installation Wizard.
3. Follow the prompts, using Help on each page for more information.
Configure this server as "active."
On S8710 Media Servers
Connecting customer LAN cables
To connect the customer's LAN cables:
1. Connect the CAT5 cables from both S8710 Media Servers (Ethernet 4) to the customer
LAN.
On S8710 Media Servers
Accessing the media server
Issue 4 January 2005
on page 143
147