Equipment Installation; Install The Ethernet Adapter - Avaya Communication Server 1000M Single Group Manual

Equipment installation

Start the installation of the Hospitality Integrated Voice Services card and the external
equipment connections associated with the Hospitality Integrated Voice Services card after
the following has been done:
• verify that the pre-installation preparation has been completed (this includes verifying that
all the equipment has been received undamaged)
• plan the Hospitality Integrated Voice Services equipment, port configuration, and external
equipment connection configuration (see

Install the Ethernet adapter

Follow the steps in
to install the Ethernet adapter on a CS 1000M Cabinet or Chassis. Follow the steps in
an Ethernet adapter on IPE module I/O panel
an IPE module.
Installing an Ethernet adapter onCabinet tip/ring connector
1. Identify the 50-pin tip/ring connector at the bottom of the cabinet or back of the
2. Plug the 50-pin connector on the NT5D52BC Ethernet adapter into the 50-pin tip/
3. Secure the Ethernet adapter to the cabinet.
Installing an Ethernet adapter on IPE module I/O panel
1. Remove the cover plate from the I/O panel at the rear of the IPE module.
2. Lift the I/O panel from the module by removing all of the retaining screws.
3. Disconnect the backplane cable 50-pin connector from the I/O panel filter
4. Remove the existing filter connector from the I/O panel and save the retaining
5. Install the NT5D52AC Ethernet adapter into the selected I/O panel connector cut-
Hospitality Integrated Voice Services Fundamentals
Installing an Ethernet adapter onCabinet tip/ring connector
chassis that corresponds to the card-slot position where the Hospitality Integrated
Voice Services card will be installed.
ring connector on the CS 1000M Cabinet or Meridian 1 PBX 11C Cabinet.
connector.
screws.
This filter connector corresponds to the card slot selected for Hospitality Integrated
Voice Services card installation.
out using the saved retaining screws.
Engineering guidelines
on page 49 to install the Ethernet adapter on
Equipment installation
on page 27).
on page 49
Installing
March 2013 49