DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
802.1x Auth Mode Settings
The following window is used to set the type of authentication mode used in employing the 802.1X security settings.
Simply use the pull down menu to select port_based or mac_based 802.1X and click the Apply button.
Figure 6- 91. 802.1X Auth Mode Settings window
802.1X Authenticator Settings
To configure the 802.1X authenticator settings, click Configuration > Port Access Entity > 802.1x Authenticator
Settings:
Figure 6- 92. Configure 802.1X Authenticator Parameter window
To view the 802.1X authenticator settings on a different switch in the switch stack, use the Unit pull-down menu to select
that switch by its ID number in the switch stack. To configure the settings by port, click on the hyperlinked port number
under the Port heading, which will display the following table to configure:
127