Hood Frame - BOMBARDIER 1982 Shop Manual

c
c
FOR ELITE MODEL:
Refer to the equivalent model in section 07-01.
FRAME WELDING
Steel frame:
- Electric Welding
- Amperage: 70-110 Amp.
- Voltage: 20-24 volts
- Rod: E-7014
(3/ 32")
Aluminum frame: (refer to specialized welding shop)
- Argon-oxygen / acetylen welding
- Rod: ER-4043
(3/ 32")
_ CAUTION: When electrical welding is to be per-
... formed anywhere on the vehicle, unplug the mul-
tiple connector at the electronic box prior to connecting
the welding wire to the vehicle. This will protect the
electronic box against damage caused by flowing cur-
rent when welding.
O NOTE: This procedure applies to all electronic ig-
nition systems.
SECTION 07 HOOD/FRAME
SUB-SECTION 02 (FRAME)
FRAME CLEANING
Clean frame. For aluminum frame use only" Aluminum
cleaner" and follow instructions on container. (Dursol
cleaner or equivalent).
Touch up all metal spots where paint has been scratched
off. Spray all bare metal parts of vehicle with metal pro-
tector.
SEATS
Elite model
To remove the backrest, unscrew the two (2) wing nuts
located in the engine compartment .
Seat cleaning
For all 1981 models, it is recommend to clean the seat with
a solution of soft soap/warm water and a soft cloth.
_ CAUTION: Avoid use of harsh detergent such as
... strong soaps, degreasing solvents, abrasive clean-
ers, paint thinners, etc ... they may cause damage to the
seat cover.
PAGE 443