BOMBARDIER 1982 Shop Manual page 93

c
@To install ball bearing.
O
NOTE: Ball bearing @ shielded side must be facing
water pump .
@@
To install seals proceed as follows:
35% of the distance between first and second seals (first
seal being flush with crankcase) must be filled with lithi-
um grease or equivalent.
Distance ring opening must be in line with crankcase
half draining hole.
(Apply lithium grease on seal lips).
Distance ring
opening
SECTION 02 ENGINE
SUB-SECTION 04 (454 ENGINE TYPE)
O NOTE: After installation of seals
@
check if the
bearing
@
is correctly positioned (use pusher PIN
420 876 500) .
@Apply "Loctite 242" on threads.
0Torque to 20 N-m (15 ft-Ibs).
®
Rotary valve adjustment when replacing crankcase
having no timing marks.
REOUIRED TOOLS
ENGINE TYPE
454
Angle finder
1414352900)
Toe
gauge
1414 104700)
TIMING MARKS
opening, closing
PAGE91
J