BOMBARDIER 1982 Shop Manual page 215

7. Pulley guard
2. Wing nut
3. Washer
4. Rubber spacer
REMOVAL
CD 0
Lift and support the engine compartment hood.
Unscrew the wing nuts (A) located behind the drive pul -
ley, the wing nut
(8)
on top of pulley guard and the
wing nut
(C)
at the pulley guard center support.
SECTION 03 TRANSMISSION
SUB-SECTION 01 (PULLEY GUARD)
Elite
- - 0
tl:iol -- - - - 3
~1------4
Disengage guard with a forward movement and remove
complete assembly .
•
WARNING: Engine should be running only when
pulley guard is secured in place_
To install, reverse the removal procedure.
INSPECTION
Check general condition of parts. If damaged, replace .
PAGE213