BOMBARDIER 1982 Shop Manual page 184

,---------------------------------------------
SECTION 02 ENGINE
SUB-SECTION 09 (CARBURETOR AND FUEL PUMP)
For maximum performance, correct carbu retor throttle
slide adjustment is critica l.
CD
Tighten carburetor cover.
With the throttle cab le adjuster jam nut unlocked , press
the throttle lever against the handle grip.
By turning the cable adjuster, adjust the carburetor slide
cut away so that it is flush with the top of the carburetor
bore.
(For all models except Blizzard 9500 and Ultra Sonic) .
(For Blizzard 9500 and Ultra Sonic adjust the throttle
slide flush with the top of carburetor ou t let bore).
Inlet
Thro ttle slide flu sh
'J
. --. . . . . . : : ; -
~
with carburetor
outlet bore
/"
Once both carburetors are adjusted , check that with the
throttle lever fully depressed, there is a free -play of
1/ 16"
(approx.) between the cover and throttle slide . Readjust
according ly.
PAGE 182
Approx . gap
1.5 mm
(1 / 16")
•
WARNING: This gap is very important. If the
throttle slide rests against the carburetor cover at
full throttle opening, this will create too much strain and
may damage the throttle cable .
Recheck carburetors synchronization .
Tighten the cab le adjuster jam nut.
Release the throttle lever .
r
Cable
Jam nut
--1""--
adju ster
_ CAUTION: On twin carburetor models, make sure
. . both carburetors start to operate simultaneously.
_ CAUTION: On oil injection models, the oil injec-
. . tion pump adjustment must be checked each t ime
carburetor is adjusted .
•
WARNING: It is important that the throttle slide
adjustment be performed to ensure proper func-
tioning of throttle mechanism.