BOMBARDIER 1982 Shop Manual page 337

• I'
BOMBARDIER CDI CHECKER
GENERAL
The Bombardier COl checker is a feature for the verifi -
cation of the NIPPONDENSO COl systems. This checker
combines the function of all test equipments into one
checker , and it tests all NIPPONOENSO systems under
actual operating conditions with one set of connec-
tions. All test results are digitized and will show on the
LED level indicator which is calibrated from 0 to 9. You
can diagnose the COl system by comparing the test re-
sults with the diagnostic chart.
O NOTE: The Bombardier COl checker is not appli-
cable to other Nippondenso COl systems than those
used on the Bombardier snowmobiles since 1981 mod -
els (354, 454, 464 1981 Nippondenso COl engine types) .
SECTION 04 ELECTRICAL
SUB-SECTION 07 (TESTING PROCEDURE)
SPECIFICATION AND
CONSTRUCTION
Specification
Power source: ac 115 volts/60 Hz
Power consumption: Less than 50 watts
Ambient temperature : - lOoe to 40°C (for usage)
-30°C to 60°C (for storage)
Dimensions:
370 (H) x 230 (W) x 120 (D)
Weight : Approx. 4.0 kg
Standard accessories: Test wire harness A, Band
e
Grounding wire ·
Construction
3
#-.1'---- 10
1'!'--'---11
9
1. Diagnostic chart
2. LED level indicator
3. Selector
4. HI & LO switch
5. START & RESET switch
6. Power switch
7. Fuse box
8. Test wire harness connector
9. Grounding wire connector
10. Power cord
11. Accessories box
------
PAGE 337
.-J