BOMBARDIER 1982 Shop Manual page 363

• £
REMOVAL
Release track tension by loosening adjuster bolts locat-
ed on inner side of rear idler wheels.
Adjuster
"'~~:iJ~~~\
bolt
Position the adjustment cams at the lowest elevation .
Front
~
L.H S R.H.S.
HIGH POSITION
Remove the two lower shock absorber screws.
Remove the four bolts securing suspension to frame.
Remove suspension.
SECTION 05 SUSPENSION
SUB-SECTION 02 (SLIDE & MX SUSPENSIONS)
DISASSEMBLY & ASSEMBLY
Q), G )(3)@To replace a worn slider shoe, remoye the
screw and spiral pin. Slide the shoe rearwards out of the
runner.
@To remove the rivets securing the adjustment plate
on the front arm supports, cut off the rivet heads using
a cold chisel.
At assembly, position the rivet head on a suitable metal
block and hold the assembly firmly in place . With a flat
head punch and hammer secure the rivet in place,
Flat head punch
Metal block
®
At assembly, adjustment cam must be installed to that
hexagonal projection on cam which is located toward
front of vehicle.
+---
Front
Front _
PAGE 363