BOMBARDIER 1982 Shop Manual page 349

c
INSTALLATION
With rear of vehicle supported off the ground, position
front bogie wheel set in location and secure to frame using
lock washers and bolts. Secure rear set then remaining
set(s) to frame.
O
NOTE: On Elan and Spirit models,
PUl
the wider
portion of bogie wheel to the front direction of ve-
hicle. (On Alpine inverse the position.)
Rear
-c
. . Front
Using an appropriate tool, apply track tension by hook-
ing the link plate springs into the anchors.
O
NOTE: If applicable, place spring ends in middle
position of the 3 position slotted anchor.
@
Lubricate each bogie wheel until new grease ap-
pears at joint . Wipe off excess grease (grease
PIN
498
028 100).
O NOTE: To adjust the track tension and alignment
refer to section 05-05 .
SECTION 05 SUSPENSION
SUB- SECTION 01 (BOGIE WHEELS)
PAGE 349