BOMBARDIER 1982 Shop Manual page 397

c
c
c
7. Ski
2. Runner shoe
3. Nut
4. Main spring leaf
5. Spring slider cushion
6. Retainer pin
7. Cotter pin
B. Auxiliary spring leaf
9. Auxiliary spring leaf
70. Spring leaf coupler
77. Rebound stopper
72. Nut
73. Bolt
74. Bolt
75. Nut
76. Ski leg
77.
Shock
INSPECTION
Check skis and runner shoes for excessive wear, replace
if necessary.
Make sure steering arm and ski leg splines interlock.
Check general condition of steering system components
for wear and replace if necessary.
DISASSEMBLY & ASSEMBLY
•
(3)WARNING: Observe caution while prying or
removing steel runner shoes from ski slots as the
shoes are under tension. Check that ski runner shoes
are not worn more than half of their original thickness.
(3)
Replace when half worn.
G)
On Elan and Spirit vehicles, torque to 7 N-m (5 ft-Ibs).
On all others vehicles, torque to 22 N-m (16 ft-Ibsl.
_ 0 ® ®
CAUTION: When disassembling leaf
... coupler from spring leaves be careful of leaf tension.
SECTION 06 STEERING/SKIS
SUB-SECTION 02 (SKI SYSTEM)
7B. Spacer
79. Retainer pin
20. Hair pin
27. Cup
22. Bushing
23. Rubber spacer
24. Bolt
25. Washer
26. Nut
27. Rubber bumper
2B. Rivet
29. Protector tube (Europe)
30. Screw
37. Nut
32. Ski bumber
33. Hair pin
34. Rubber bushing
When assembling spring leaves, cross each and tempo-
rarily insert one
(1)
nut@ and bolt then position them
parallel to each other and install remaining bolt and nut.
Tighten fully.
®
Apply Lithium grease at least once a year .
@ @
Torque bolt and move ski by hand to check that it
pivots on ski leg. Torque locking nut to 61 N-m (45 ft-Ibs) .
For all models.
PAGE 397