BOMBARDIER 1982 Shop Manual page 346

SECTION 04 ELECTRICAL
SUB-SECTION 07 (TESTING PROCEDURE)
FUSE REPLACEMENT
If no LED lights, check fuse provided in checker .
a) Unscrew the cap.
b) Replace the fuse with new one (1 amps Midget glass
tube type,
(J
6.4 x 30 mm) if necessary.
1\
Cap
(li)
REPAIR AND AFTER-CARE SERVICE
In the event of a failure or fault calling for repair, con-
tact Nippondenso Canada Ltd. It is strictly prohibited
that the user should disassemble the instrument. Be
aware that some semiconductors may be damaged
even by static electricity stored in the human body .
Also, contact Nippondenso Canada Ltd, for the sup-
ply of accessories.
Nippondenso Canada Ltd.
4500 Sheppard Avenue East, Unit 29
Agincourt, Ontario
Canada (M1 S 3R6)
PAGE 346