BOMBARDIER 1982 Shop Manual page 103

r
INSTALLATION ON VEHICLE
To install engine on vehicle, reverse removal procedure.
However, pay attention to the following:
• Check tightness of engine mount nuts.
• After carburetor installation, check maximum throt-
tle slide opening and oil pump adjustment .
• Check drive pulley alignment and adjust drive belt
tension.
• Align alternator pulley with fan adaptor pulley: both
pulleys must be in line within
1/32".
• Adjust alternator belt tension: V -belt must have
1/4"
play with 5 Ibs load.
O
NOTE: Alternator pulley alignment must be
checked every time the drive pulley is aligned.
SECTION 02 ENGINE
SUB- SECTION 05 (464 ENGINE TYPE)
PAGE 101