BOMBARDIER 1982 Shop Manual page 150

SECTION 02 ENGINE
SUB-SECTION 06 (503 ENGINE TYPE)
The ground terminal from generating coil must be
fastened under this clip.
_ CAUTION: Before reinstalling magneto remove
Y
the loose epoxy from harness.
ASSEMBLY
Clean crankshaft extension (taper).
Apply "Loctite 242" on taper.
Position key and magneto housing on crankshaft.
@)
Clean nut threads and apply "Loctite 242" (blue,
medium strength) before tightening nut to 85 N.m
(63 ft-Ibs).
®
®@
®
At reassembly coat all electric connec-
tions with dielectric or lithium grease to prevent
corrosion or moisture penetration .
_ CAUTION: Do not use silicone sealant, this pra-
y
duct will corrade contacts.
PAGE 148