BOMBARDIER 1982 Shop Manual page 213

c
REMOVAL
®@ Remove the two hair pins and the retainer pin.
CD0 Unscrew the wing nut, then remove the pulley
guard.
To install, reverse the removal procedure .
•
WARNING: Engine should be running only when
pulley guard is well secured in place.
SECTION 03 TRANSMISSION
SUB-SECTION 01 (PULLEY GUARD)
INSPECTION
Blizzard 5500 MX
Sonic MX
1. Pulley guard
2. Wire
3. Ring terminal
4. Rivet
5. Hair pin
6. Rubber spacer
7. Wing nut
8.
Retainer pin
Check all parts for damage. Replace as required .
PAGE211