BOMBARDIER 1982 Shop Manual page 29

• i
«
Inside lip
facing towards
the crankcase
\~
Chamfered side
towards the
crankshaft bearing
@
ro install new seal into crankcase use an appropriate
oil seal pusher as illustrated. (See Tools Section!.
Also, prior to crankcase adjoining, install a protector
sleeve on each' crankshaft extension to prevent oil seal
damage (See Tool Section!. Apply a light coat of lithi-
um grease on seal lip.
_ CAUTION: To ensure appropriate crankshaft
... bearing lubrication, seal outer surface must be
pressed on seal crankcase shoulder.
SECTION 02 ENGINE
SUB-SECTION 01 (247 ENGINE TYPE)
®\®\
(tjTorque to 22 N-m (16 ft-Ibs) following illus-
trated sequence.
@ Torque to 35 N-m (26 ft-Ibs!.
®
Position labyrinth ring with bevelled side on top .
To install magneto, refer to "Magneto" in this section.
PAGE 29