Enter/Exit Programming Mode
Interleaved 2 of 5 (I 2 OF 5)
Interleaved 2 of 5 (I 2 OF 5) Enable
Enables/disables the ability of the scanner to decode Interleaved 2 of 5 labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
009001(CR)
I 2 of 5 = Enable
210
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode barcode.
Interleaved 2 of 5 (I 2 OF 5) Enable
009000(CR)
I 2 of 5 = Disable
Magellan™ 1500i