Enter/Exit Programming Mode
UPC/EAN Minimum Segment Length
This feature specifies the minimum number of characters needed in a UPC/EAN
segment in order to be accepted for decoding.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode for the desired setting below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
048F06(CR)
UPC/EAN Minimum Segment Length = 6 Characters
048F08(CR)
UPC/EAN Minimum Segment Length = 8 Characters
154
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode barcode.
UPC/EAN Minimum Segment Length
048F05(CR)
UPC/EAN Minimum Segment Length = 5 Characters
048F07(CR)
UPC/EAN Minimum Segment Length = 7 Characters
048F09(CR)
UPC/EAN Minimum Segment Length = 9 Characters
Magellan™ 1500i