OTHER UPC/EAN OPTIONS
UPC/EAN Minimum Segment Length
This feature specifies the minimum number of characters needed in a UPC/EAN segment in
order to be accepted for decoding.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode for the desired setting below. You'll need to cover any unused bar‐
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
DEFAULT
048F06(CR)
UPC/EAN Minimum Segment Length = 6 Characters
048F08(CR)
UPC/EAN Minimum Segment Length = 8 Characters
PRODUCT REFERENCE GUIDE
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
barcode.
ENTER/EXIT PROGRAMMING MODE
048F05(CR)
UPC/EAN Minimum Segment Length = 5 Characters
048F07(CR)
UPC/EAN Minimum Segment Length = 7 Characters
048F09(CR)
UPC/EAN Minimum Segment Length = 9 Characters
163