UPC/EAN Stitch Unlike Label Halves
UPC/EAN Stitch Unlike Label Halves
This setting enables the stitching of two UPC-A/EAN-13 label halves together
that may have different characters.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
054201(CR)
UPC/EAN Stitch Unlike Label Halves = Enable
Product Reference Guide
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode barcode.
Enter/Exit Programming Mode
054200(CR)
UPC/EAN Stitch Unlike Label Halves = Disable
153