ENTER/EXIT PROGRAMMING MODE
UPC/EAN Stitch Unlike Label Halves
This setting enables the stitching of two UPC‐A/EAN‐13 label halves together that may have
different characters.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
DEFAULT
054201(CR)
UPC/EAN Stitch Unlike Label Halves = Enable
162
MAGELLAN™ 1500I
054200(CR)
UPC/EAN Stitch Unlike Label Halves = Disable