Maximum Cp Resolution Pane; Resolution Configuration Pane; Resolution Configuration - Basic - Polycom RealPresence 1500 Administrator's Manual

Resolution Configuration - Basic

The Resolution Configuration basic dialog box contains the following panes:
● Max CP Resolution Pane
● Resolution Configuration Pane

Maximum CP Resolution Pane

In MPMx/MPMRx Card Configuration Mode the Collaboration Server can be set to one of the following
Maximum CP Resolutions:
● HD 1080p60
● HD 1080p30
● HD 720p30
● SD 30
● CIF 30
Limiting Maximum Resolution
Before a selection is made in this pane, the Maximum CP Resolution of the system is determined by the
MAX_CP_RESOLUTION System Flag.
The MAX_CP_RESOLUTION flag value is applied to the system during First Time Power-on and after a
system upgrade.
The default flag value is HD1080 setting the Maximum CP Resolution value in the Resolution
Configuration dialog box to 1080p60.
All subsequent changes to the Maximum CP Resolution of the system are made by selections in this pane.
The Maximum Resolution can further be limited per conference or per participant endpoint.
The Maximum Conference Resolution, can be limited via the Profile - Video Quality dialog box. For more
information see New AVC CP Profile - Video Quality Parameters
Parameters.
The Maximum Resolution can further be limited per participant endpoint via the Participant - Properties
dialog box. For more information see

Resolution Configuration Pane

The user can select from 3 pre-defined Resolution Configurations or select a manual Resolution Slider
adjustment mode. The pre-defined settings can be accepted without modification or be used as the basis
for manual fine tuning of resolution settings by the administrator.
Polycom®, Inc.
Video Protocols and Resolution Configuration for CP Conferencing
New Participant - Advanced.
and New SVC Profile - Video Quality
132