Polycom RealPresence 1500 Administrator's Manual page 77

New AVC CP Profile - Advanced Parameters
Field/Option
Auto Redialing
Exclusive Content Mode
TIP Compatibility
Enable FECC
FW NAT Keep Alive
Interval
Polycom®, Inc.
Description
The Auto Redialing option instructs the Collaboration Server to automatically
redial H.323 and SIP participants that have been abnormally disconnected from
the conference.
• Auto Redialing is disabled by default.
• Auto Redialing can be enabled or disabled during an ongoing conference
using the Conference Properties – Advanced dialog box.
• The Collaboration Server will not redial an endpoint that has been
disconnected from the conference by the participant.
• The Collaboration Server will not redial an endpoint that has been
disconnected or deleted from the conference by an operator or administrator.
Select this option to limit the Content broadcasting to one participant, preventing
other participants from interrupting the Content broadcasting while it is active.
Select the TIP Compatibility mode when implementing an Collaboration Server
and Cisco Telepresence Systems (CTS) Integration solution. The TIP
Compatibility mode affects in the user video and content experience.
The following TIP Compatibility modes are available:
• None
• Video Only
• Video & Content
• Prefer TIP
From Version 8.1.1, Polycom endpoints can also connect to Entry Queues,
Meeting Rooms and conferences using the TIP protocol.
The connection of the Polycom endpoints with TIP protocol to a TIP Compatible
Entry Queues, Meeting Rooms and conferences using the TIP protocol is
enabled when the Polycom endpoints are registered to the CUCM and the
Prefer TIP option is selected in the conference Profile.
When the Prefer TIP option is selected, conferencing entities can include
endpoints connected using all protocols, including TIP and SIP protocols.
When Prefer TIP is selected, Gathering Settings, content settings, Message
Overlay, Site Names and Network Indication(s) cannot be enabled.
Note: If an option other than None is selected in this field, the Gathering
Settings options are disabled.
For more information, see
Interoperability Protocol (TIP).
This option is enabled by default, allowing participants in the conference to
control the zoom and PAN of other endpoints in the conference via the FECC
channel. Clear this check box to disable this option for all conference
participants.
The MCU can be configured to send a FW NAT Keep Alive message at specific
Intervals for the RTP, UDP and BFCP channels.
For more information see
If needed, modify the NAT Keep Alive Interval field within the range of 1 - 86400
seconds. For more information see
Defining AVC-Based Conference Profiles
Collaboration With Cisco's Telepresence
FW (Firewall) NAT Keep
FW (Firewall) NAT Keep
Alive.
Alive.
47