Egress Bandwidth Control; Egress Queue; Figure 83: Qos > Rate Limit > Egress Bandwidth Control; Figure 84: Qos > Rate Limit > Egress Queue - Allied Telesis IS230-10GP Web User Manual

Chapter 2: Managing Switch
Item
Port
State
Rate (Kbps)
Apply
100

Egress Bandwidth Control

The Egress Bandwidth Control page allows you to set the egress
bandwidth control for a listed port.
To access this page, click QoS > Rate Limit > Egress Bandwidth
Control.
Figure 83. QoS > Rate Limit > Egress Bandwidth Control
The following table describes the items in Figure 83.
Table 80. Egress Bandwidth Control
Description
Enter the port number to set the Egress Bandwidth Control.
Select Disabled or Enabled to set the Egress Bandwidth Control
state.
Enter the value in Kbps (16 to 1000000) to set the Egress Bandwidth
rate.
Click Apply to save the values and update the screen.
The Egress Bandwidth Control Status settings in the ensuing table are
informational only: Port and Egress Rate Limit (Kbps).

Egress Queue

The Egress Queue page allows you to set the egress bandwidth
parameters.
To access this page, click QoS > Rate Limit > Egress Queue.
Figure 84. QoS > Rate Limit > Egress Queue