Ripng For Ipv6 Commands; Introduction; Chapter 19: Ripng For Ipv6 Commands - Allied Telesis AT-AR3050S Command Reference Manual

19

Introduction

Overview This chapter contains RIPng commands. RIPng (Routing Information Protocol next
generation) is an extension of RIPv2 to support IPv6. RFC 2080 specifies RIPng. The
differences between RIPv2 and RIPng are:
•
•
•
For more information, see the
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50077-01 REV A
RIPng does not support RIP updates authentication
RIPng does not allow the attachment of arbitrary tags to routes
RIPng requires the encoding of the next-hop for a set of routes
"aggregate-address (IPv6
"clear ipv6 rip route" on page 712
"debug ipv6 rip" on page 713
"default-information originate (IPv6
"default-metric (IPv6 RIPng)" on page 715
"distribute-list (IPv6 RIPng)" on page 716
"ipv6 rip metric-offset" on page 717
"ipv6 rip split-horizon" on page 719
"ipv6 router rip" on page 721
"neighbor (IPv6 RIPng)" on page 722
"passive-interface (IPv6
"recv-buffer-size (IPv6
"redistribute (IPv6 RIPng)" on page 725
"route (IPv6 RIPng)" on page 726
"router ipv6 rip" on page 727
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
RIPng for IPv6
Commands
RIPng Feature Overview and Configuration
RIPng)" on page 711
RIPng)" on page 714
RIPng)" on page 723
RIPng)" on page 724
Guide.
709