Vehicle Speed Sensor (Vss); Fuel Level Sensor (Gauge); Knock Sensor; Main Relay, Fuel Pump Relay And A/C Condenser Fan Control Relay - Suzuki Jimny Service Manual

Jimny suzuki

Hide thumbs Also See for Jimny:

Table of Contents

6E-36 ENGINE AND EMISSION CONTROL SYSTEM

Vehicle speed sensor (VSS)

Check vehicle speed sensor referring to step 7 of "DTC P0500

(No.16) Flow Table" in Section 6. If malfunction is found, replace.

Refer to "Fuel Meter / Fuel Gauge Unit" in Section 8.

REMOVAL / INSTALLATION

Refer to "Fuel Pump Assembly" in Section 6C.

Check knock sensor referring to "DTC P0325 (No.17) Flow Table"

in Section 6. If malfunction is found, replace.

REMOVAL / INSTALLATION

Refer to "Knock Sensor" in Section 6A1.

Main relay, fuel pump relay and A/C condenser fan

control relay

1) Disconnect negative cable at battery.

2) Remove main relay (1), fuel pump relay (2) and A/C con-

denser fan control relay (3) from vehicle.

3) Check that there is no continuity between terminal "A" and

"B". If there is continuity, replace relay.

4) Connect battery positive (+) terminal to terminal "C" of relay.

Connect battery negative (–) terminal "D" of relay.

Check continuity between terminal "A" and "B".

If there is no continuity when relay is connected to the bat-

tery, replace relay.

Table of Contents