Sub Fuel Level Sensor Inspection; Specifications; Tightening Torque Specifications - Suzuki Grand Vitara 2011 Manual

1G-21 Fuel System: For Petrol Engine Model
Removal
1) Remove fuel tank from vehicle Referring to "Fuel
Tank Removal and Installation: For Petrol Engine
Model"
2) Disconnect sub fuel level sensor connector (1).
3) Remove sub fuel level sensor (2).

Tightening Torque Specifications

Fastening part
Fuel delivery pipe bolt
Fuel pressure regulator bolt
Fuel tank bolt
Fuel filler hose clamp
Fuel pump assembly bolt
NOTE
The specified tightening torque is also described in the following.
"Fuel System Components: For Petrol Engine Model"
"Fuel Hose Disconnecting and Reconnecting: For Petrol Engine Model"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fastener Information in Section 0A".
1
2
2
I5JB0A171029-01

Specifications

Installation
Reverse removal procedure for installation noting the
following.
• Replace O-ring with new one using care not to
damage it.
• Apply thin coat of fuel to O-ring, and then install sub
fuel level sensor.

Sub Fuel Level Sensor Inspection

• Check sub fuel level sensor for damage.
• For inspection of sub fuel sensor (1), refer to "Fuel
Level Sensor Inspection in Section 9C".
Tightening torque
N⋅m kgf-m
25 2.5
11 1.1
50 5.0
2 0.2
11 1.1
S6JB0A1716023
1
I5JB0A171030-01
S6JB0A1717001
Note
lb-ft
18.0
8.0
36.5
1.5
8.0