Copying Memory Contents; D Copying In The Memory Mode; D Copying In The Vfo Mode - Icom IC-7100 Instruction Manual

Previous view
11
MEMORY OPERATION

Copying Memory contents

The Memory channel contents (frequency, operating
mode, and so on.) can be copied to the VFO.
D
Copying in the Memory mode
q
Touch the Memory channel number indication once
or twice to select the Memory mode. (p. ??-??)
w L) or [M-CH](L) to select the Mem-
Rotate [BANK](
ory channel to be copied.
• "BLANK" appears if the selected Memory channel is a
blank channel. In this case nothing can be copied.
e D) for 1 second to copy the Memory
Touch [V/M](
channel contents into the VFO.
r
Touch the Memory channel number indication to se-
lect the VFO mode. (p. ??-??)
D
Copying in the VFO mode
➥
In the VFO mode, select the Memory channel num-
ber to be copied. And then, touch [V/M] for 1 second
to copy the Memory channel contents into the se-
lected VFO.
• "BLANK" appears if the selected Memory channel is a
blank channel. In this case nothing can be copied.
L eft D isplay
C enter
11-9
The L, R, C or D in the
R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
Touch [V/M]
for 1 second.
The Memory
channel contents
are transferred into
the selected VFO.
( The display does
not change.)
Touch [V/M].