Previous view
7
D-STAR OPERATION <ADVANCED>
Your setting is correct?
If you make a local area call with a gateway setting still
selected in "TO," the destination repeater will be busy
while you transmit.
So the stations that use that repeater as their Access
repeater cannot access it, as shown below.
BE SURE to set CQCQCQ in "TO" when you intend to
make a local call, or after you finish a Gateway call.
Example: JM1ZLK wants to make a Local area call.
Caller
(JM1ZLK)
JM1ZLK's setting
The destination ("TO") setting is incorrect.
Correct setting
To make a Local area call, set the destina-
tion ("TO") to "CQCQCQ."
See page 6-13 for details.
Hamacho repeater
Hamacho area
Hirano repeater
Hirano area
NOTE: With this setting, the Local
area call can be made, but the des-
tination repeater, selected in "TO,"
is also busy while you transmit.
So the station that uses the desti-
nation repeater as their Access re-
peater cannot access it.
7-36
Called