Printer Cover; Cover Open Button; Cover Open Sensor; Print Buffer-Full Printing - Epson TM-U925 Manual

3.10 Printer Cover

3.10.1 Cover open button

When the cover open button (see Section 4.3, External Appearance ) is pressed, the printer cover is
opened. When the cover is closed, the cover open button is latched.
NOTE: Be sure to use the cover open button located on the front of the printer to open the printer
cover.

3.10.2 Cover open sensor

The cover open sensor monitors the printer cover. When the sensor detects a cover-open, the printer
automatically goes off-line after printing the current line. After the printer cover is opened, the printer
moves the carriage to the home position at a low speed.
To get back on-line, close the printer cover.
NOTE: Because the printer mechanism is reinitialized after the printer cover is opened and closed, the
cover must not be opened during printing to prevent an incorrect paper feed pitch.

3.11 Print Buffer-full Printing

When subsequent data is received after the printer processes one line of data in the print buffer, the
printer automatically prints the processed line and feeds the paper by one line.

3.12 Loading the Paper Roll

If paper from the paper roll is inserted into the paper path with the printer cover open, the paper is
detected by the paper sensor, and receipt and the paper is fed automatically by approximately 180 mm
(7.09"). If the amount of paper fed automatically is insufficient, the user can feed additional paper by
using the PAPER FEED button. The paper roll can also be loaded with the PAPER FEED button.
EPSON
TITLE
TM-U925
Specification
(STANDARD)
SHEET NO.
REVISION
NEXT
A
49
SHEET
48