Table of Contents
Advertisement
Appendix O
To prevent malfunction, the cover open lever can be replaced with the included small cover open lever.
O.1
Replacement for Small Cover Open Lever
Step 1:
Check that the printer's power is off, then open the roll paper cover.
Step 2:
Press down on the cover open lever and remove the cover open lever screw.
Step 3:
Pull the cover open lever out from the metal sheet part.
Step 4:
Insert the small cover open lever into the metal sheet part.
Step 5:
Fasten the small cover open lever with the screw removed in step 2.
Step 6:
Set the roll paper.
Step 7:
Close the roll paper cover, then turn the printer power on.
REPLACEMENT FOR SMALL COVER OPEN LEVER
Figure O.1
Figure O.2
70
Advertisement
Table of Contents
