NEC Univerge SV8100 Features And Specifications Manual page 436

Issue 12.0
Required Component(s)
VRS for Messaging
Related Features
Call Arrival (CAR) Keys
Call Forwarding
Department Step Calling
Transfer
VM8000 InMail
Voice Response System (VRS)
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-07-01 Department Group Pilot Numbers
– Dial
11-11-25 Service Code Setup (for Setup/
Entry Operation) – Automatic
Transfer Setup for Each
Extension Group
11-11-26 Service Code Setup (for Setup/
Entry Operation) – Automatic
Transfer Cancellation for Each
Extension Group
2 - 406
Description/Comments
Assign pilot numbers to each
Department Group set up.
Set the service code to activate
immediate automatic transfer for
ICM and transferred calls to
Department Groups.
Set the service code to deactivate
immediate automatic transfer for
ICM and transferred calls to
Department Groups.
UNIVERGE SV8100
Assigned Data
1
Up to eight digits

(default not assigned)
MLT, SLT
(default = 602)
MLT, SLT
(default = 603)
Department Calling
Level
2 3

