NEC Univerge SV8100 Features And Specifications Manual page 437

UNIVERGE SV8100
Program
Program Name
Number
11-11-27 Service Code Setup (for Setup/
Entry Operation) – Destination of
Automatic Transfer Each
Extension Group
11-11-28 Service Code Setup (for Setup/
Entry Operation) – Delayed
Transfer for Every Extension
Group
11-11-29 Service Code Setup (for Setup/
Entry Operation) – Delayed
Transfer Cancellation for Each
Extension Group
11-12-09 Service Code Setup (for Service
Access) – Change to STG
(Department Group) All Ring
11-16-10 Single Digit Service Code Setup
– (Department) STG All Ring
Mode
15-07-01 Programmable Function Keys
16-01-01 Department Group Basic Data
Setup – Department Name
16-01-02 Department Group Basic Data
Setup – Department Calling
Cycle
Department Calling
Description/Comments
Set the service code for setting the
destination for immediate
automatic transfer for ICM and
transferred calls to Department
Groups.
Set the delayed transfer
destination Department Group.
Cancel the delayed transfer
destination Department Group.
Set the service code for ringing all
members of a Department Group.
Assign the Single Digit
(post-dialing) Service Code for All
Member Ring.
Assign a Department Calling key
(46) so extension users can install
or remove themselves from the
Department Calling Group.
Additional keys can also be
assigned for Department Group
features immediate calling
destination (58), delayed calling
destination (59) and DND
destination (60).
Assign a name to the Extension
(Department) Groups.
Set the routing cycle for calls into
a department (i.e., when a user
dials the department pilot
number). The system can ring the
highest priority extension available
(Priority Routing, 0) or cycle in
circular order to a new idle
extension for each new call
(Circular Routing, 1).
Assigned Data
1
MLT
(default = 604)
MLT, SLT
(default = 605)
MLT, SLT
(default = 606)
MLT, SLT
(default not assigned)
(default not assigned)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Maximum 12
characters
(default not assigned)
0 = Normal Routing
(Priority)
1 = Easy – UCD
Routing (Circular)
(default = 0)
Issue 12.0
Level
2 3








2 - 407