NEC Univerge SV8100 Features And Specifications Manual page 549

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
3.
Announce the call after tone burst or wait for call to be answered.
To place an outside call:
1.
Press TALK.
X icon is displayed
2.
Dial trunk access code and number
-OR-
Select trunk appearance and dial number.
Wait for call to be answered.
To answer an Incoming Ringing Call:
1.
When the handset is in the charger, lift it. icon is displayed.
2.
When the handset is out of the Base Unit, press TALK if ringing line preference is assigned.
icon is displayed.
3.
Talk.
To place a call on Hold (internal or outside):
With a call in process, press HOLD.
To retrieve a held call, press flashing F1~F4.
After a programmed time, the held call recalls to the originating terminal.
To redial a number:
1.
Press REDIAL.
2.
The previously dialed number is called.
To transfer a call:
1.
With a call in process, press TRANSFER.
2.
Dial Station Number.
- OR -
Press (F1~F4) programmed for Direct Station Selection (DSS).
3.
Announce call (optional).
4.
Press TALK to complete transfer.
term
D
Cordless II Terminal
.
Issue 7.0
2 - 521

Advertisement

Table of Contents
loading

Table of Contents