Configuration 2: One Dhcp Server For Two Vlans - Mitel 3300 Technician's Handbook

3300 ICP Technician's Handbook

Configuration 2: One DHCP Server for Two VLANs

Figure 121: One DHCP Server for two VLANs - Example
Table 63 shows the DHCP settings programmed for this configuration.
Setting
DHCP
Subnet
Opt. 03
Opt 125 or 43
(Rel. 7.0>)
Opt. 128*
Opt. 129*
Opt. 130*
Opt. 132*
Opt. 133*
*
Required on Release 7.0 systems to allow IP sets to upgrade to firmware that supports
304
Table 63: DHCP Settings Example -
Configurations 2 and 3
DHCP Server on VLAN 1 (IP: 10.10.10.2)
Scope 1
10.10.10.10 to 10.10.10.100
255.255.255.0
10.10.10.251
id:ipphone.mitel.com;sw_tftp=20.20.20.1;call_srv=20.20.20.1;
vlan=2;l2p= 6;dscp=46;
20.20.20.1
20.20.20.1
MITEL IP PHONE
2
6
options 125 and 43.
Scope 2
20.20.20.10 to 20.20.20.100
255.255.255.0
20.20.20.251
20.20.20.1
20.20.20.1
MITEL IP PHONE
2
6