Mitel 3300 Technician's Handbook page 28

3300 ICP Technician's Handbook
CAUTION: Ensure that you record your Linux Admin pass-
word. If you lose this password, it cannot be recovered. You
will have to re-install the MAS software and set a new pass-
word.
Configure Server Manager Fields
6. Connect the ethernet cable from the Network Interface Card (NIC)
connector on your laptop to Port 1 of the MXe Server.
7. On your laptop set the NIC IP address to 192.168.1.20. The following
steps are for Windows 2000 or Windows XP operating systems:
- Click Start, click Settings, click Network and Dialup
Connections, and then click Local Area Network Connection
- Select Internet Protocol (TCP/IP)
- Click Properties
- Select Use the following IP address
- Enter the following IP address: 192.168.1.20
- Enter Subnet Mask (use the same Subnet Mask that you
configured for the APC)
- Click OK
- Click Start, click Settings, click Network and Dialup
Connections, and then click Local Area Network Connection.
Ensure that the connection is Enabled.
8. Launch Microsoft Internet Explorer and go to the following URL:
https:/192.168.1.8/server-manager.
9. At the login page, enter
Username: admin
Password: (enter the Linux admin password that you set through the
Server Console). The Managed Application Server Manager
application opens.
10. Under Applications, click Mitel Communications Director. The
Mitel Communications Director screen is displayed:
18