3300 ICP Technician's Handbook
Connect Laptop PC
1. Power up the MXe Server and wait approximately 3 minutes for the
software to enable the printer port.
2. Connect the RS-232 serial cable between the COM 1 port on your
laptop to the server printer port (see Figure 1).
3. Open a communication application (for example ProCom or
Hyperterminal) on your laptop to the 3300 ICP and set the connection
parameters as follows:
Table 2: Communication Connection Parameters
Parameter
Port
Bits Per Second
Data Bits
Parity
Stop Bits
Flow Control
Emulation
16
Figure 1: Laptop Connections
Required Setting
COM 1 (example only)
38400
8
None
1
None
VT100