Mitel 3300 Technician's Handbook page 105

3. The SI Login Screen will appear. Complete the login and IP
addresses, and click Configure.
4. The Upgrade Screen appears. Click Perform Upgrade. Leave the
Offline check box unchecked.
5. Enter path (or Browse) to the 3300 ICP software.
6. Click Next. Select the desired upgrade options.
CAUTION: If you choose "transfer resilient devices imme-
diately" active calls will be terminated.
Tip: While Data Preservation and Software Activation are in progress, no
database changes will be permitted. No changes will be saved from the time
the Backup starts. This includes changes made from the System
Administration Tool, Enterprise Manager and Desktop Tools.
7. In the License and Option Selection screen, enter the ARID
(Application Record ID) and click on Retrieve Licenses.
If you chose 3300 ICP, you will be able to manually enter some of the
license options if you wish.
If you chose MXe Server, you will not be able to enter any of the
licenses manually. Clicking Retrieve Licenses will attempt to fill in the
license options.
- If licenses exist, the screen will be filled in with all of the licenses
and options.
- If licenses do not exist, the Software Installer tool will try to connect
to the AMC to get the licenses.
- If licenses do not exist and the AMC is unreachable, then the SI will
create a batch file that will allow you to license the controller later,
after you are able to contact the AMC.
Click Next.
Tip: You will not be able to continue with the installation until the licenses
have been obtained.
8. Click Start on the Upgrade In Progress screen.
9. If you didn't schedule software activation, you must activate the new
software when the installation is complete. Refer to "Complete Online
Upgrade – Software Activation" on page 97.
Software Installation
95