Controller Card (Ax) - Mitel 3300 Technician's Handbook

3300 ICP Technician's Handbook

Controller Card (AX)

To replace the AX controller card:
1. Power down the controller and disconnect cables.
2. From the rear of the controller, loosen the lock screws.
3. Lift the lock latch and slide the controller card from the chassis.
4. Transfer the i-Button, flash card(s), and MMCs to the new controller
card.
5. Slide the replacement controller card into the chassis.
6. Push the lock latch down and tighten the lock screws.
7. Connect the cables and power up the controller.
232